Sensors
메뉴열기
총 21건, 1/2 페이지
Supply voltage 1) | 9V … 30V DC | Dimensions | see dimension drawing |
Current drawn | ca. 2mA | Reference voltage output 3) | 5,00 Volt |
Externally regulated supply voltage 2) | 5 Volt | Temperature drift of the reference voltage | < 25 ppm/K |
Current drawn with external supply voltage 5V | approx. 1mA | Maximum current of the reference voltage output | 5mA |
Maximum Operating Temperature | +85°C | Output resistance | ca. 100 Ohm |
Minimum Operating Temperature | -40°C | Protection | IP 65 |
Maximum Storage Temperature | +90°C | Weight (Sensor excluding mounting ring and cable) | 18,5 g |
Minimum Storage Temperature | -55°C | Enviroment Humiditi | 0…100% r.F. |
Signal-to-noise ratio at signal output (0…10kHz) | <150µVss | Electrical signal-to-noise ratio | >85dB |
Transverse sensitivity at 45° tilt |
<1% of measure-ment value | Voltage Offset (at Cero degree tilt) | 2,5 Volt |
Settling time (to 98% of the actual value) | <0,3 s | Maximum output voltage range | 0.05V ... 4.95V |
Terminals | 3 (4) highly flexible cables, Øca.1mm, length 18cm optionally: shielded cable Ø2,1mm |
ACA 1축 Current Output INCLINOMETER
ACA 1축 Current Output INCLINOMETER
ACA 1축 Voltage output INCLINOMETER
ACA 1축 Current Output INCLINOMETER
ACA 1축 Digital Output INCLINOMETER
ACA 2축 Digital Output INCLINOMETER
High Resolution_2축 Digital Output INCLINOMETER
High Resolution_2축 Digital Output INCLINOMETER
High Resolution_2축 CAN open Output INCLINOMETER
HCA 1축 Voltage Output INCLINOMETER
HCA 1축 Digital Output INCLINOMETER
HCA 1축 Current Output INCLINOMETER
HCA 2축 Voltage Output INCLINOMETER
HCA 2축 Digital Output INCLINOMETER
HCA 2축 Current Output INCLINOMETER
HCA 1축, 2축 MODBUS Protocol INCLINOMETER
LCA 1축 Current Output INCLINOMETER
T935 Series (Single Axis / Voltage)
T935 시리즈는 고정밀 각도 측정이 필요한 다양한 산업 및 군사 응용 분야와 최대 1500g의 높은 진동 및 기계적 충격이 발생하는 견고하고 공간 제약적인 응용 분야에서 사용되는 서보 경사센서입니다.
Features
T435 'L' Series (Single Axis / 4-20mA)
높이가 61mm (2.41 인치)이고 직경이 37mm (1.46 인치) 미만인 폼 팩터를 사용하여 ± 3 ° ~ ± 90 ° 범위에서 사용할 수 있습니다.
T435 'L'은 기울기 각도의 크기에 비례하는 높은 수준의 4-20mA 신호를 가지고 있습니다.
장치는 완전히 독립적이며 DC 전원 및 판독 또는 제어 장치에 연결하여 완전한 운영 체제를 구성 할 수 있습니다.
장치는 매우 견고하며 1500g 충격 이벤트를 견딜 수 있습니다.
T435 'L'시리즈의 4-20mA 출력은 전기적으로 시끄러운 환경이나 경사계 출력 신호가 장거리로 이동해야하는 곳을 위해 특별히 설계되었습니다.
T435 'L'시리즈 경사계는 단일 24Vdc 공급 장치에서 작동하며 출력 시리즈 부하 저항은 400Ω이 될 수 있습니다.
Features