All
메뉴열기
총 43건, 1/3 페이지
* Model(s) 2211, 2911
* - 0-2 thru 0-20k psi
- +/- 0.2% FSO Static Accuracy
- 100 Ohms platinum RTD
- (17) point calibration cert with temp data
Model 2211
- This small, light weight, flight proven, transducer carries the distinction of having been assigned Space Shuttle Boeing/Rockwell ME449 part numbers. Weighing less than 4 ounces, this flight approved and NASA qualified (to 75 Grms) transducer offers a Low-Level 3mv/v output and an environmental temperature range of -450 deg F to +400 deg F for cryogenics and high temperature applications. It's all welded and Stress isolated design ensures a zero defect solution to the most rugged space vehicle and rocket designs. The Taber Model 2211 offers 0.20%* FSO static accuracy, 100 ohm Platinum RTD temperature output and numerous options for flight configuration. * May vary with Pressure Range
Model 2911
- The High level 0-5 VDC signal output version of the Model 2211. The addition of the high level module to the low level unit creates numerous options for the space propulsion designer. Accepting non-regulated 22-36 VDC or optional 10 VDC excitation power, the Model 2911 offers 4 wire isolation or non-isolated signal/power grounds enabling conformance to all flight bus requirements. Static accuracy of 0.20%* and RTD temperature output is standard. Improved accuracy is optional. A 4-20 mA version of this unit is now being offered - contact your sales agent for information. *May vary with Pressure Range
* 2403SAT
- 0-5 THRU 0-5000 psi
- class B high reliable electronics
- +/- 0.1% FSO per annum long term stability
* The Model 2403SAT was designed for the unique long life demands required for Satellite propulsion systems. The heritage for this model utilizes the same aerospace components from the Model 2403 Transducer presently flying on ChinaStar, Clementine, EOS, Landsat, Wakeshield, Seastar, IndoStar and the Lockheed Astro A2100, 7000 platforms. Taber is especially proud that this model was chosen for the NASA-JPL "Deep Space One" mission, the first of the NASA Millennium Satellites. Extremely Stable and with low drift (0.1% over 10 years), Light weight (less than 7 ounces), and completely designed for Satellite use with 0.25% Static accuracy and 0.2% (including temperature) option. 1/4 Tube stub, RFI/EMI 461/462D filtering, and RTD temperature output are standard features for this model.
MT Series 중공형 슬립링
금속 클러스터 브러시로 설계되어있으며, 홀의 내경은 12.7~300mm 까지 제공됩니다.
또한, 제품의 채널은 2~72채널 까지 제공됩니다.
하단 MODEL별 SPEC을 참고하시기 바랍니다.
# Part Number
MT - xxx XX (ex. MT1206 홀크기 12.7mm, 6채널)
모델명 홀크기 채널수
Captec 열유속센서는 표면을 통과하는 열을 측정합니다. 매우 얇고 판형 인이 센서는 측정 할 표면에 접착되거나 부착되어야합니다.
Fields
civil engineering
characterization of thermal insulation, concrete, ...
Fire test, UN 6C
thermal resistance measurements
thermal conductivity measurements
thermal comfort
education, practical work
chemistry
nuclear
solar
spatial
aviation
LSO Series (Single Axis / 4-20mA)
LSO는 고정밀 중력 기준 서보 경사센서로 다양한 산업 및 군사 응용 분야에 사용됩니다. 낮은 임피던스 출력 신호에도 다양한 각도 범위에서 모델을 사용할 수 있습니다. 6-Way bayonet lock connector (LSOC) 또는 Solder pins (LSOP)를 통해 이루어집니다.
Features
T435 'L' Series (Single Axis / 4-20mA)
높이가 61mm (2.41 인치)이고 직경이 37mm (1.46 인치) 미만인 폼 팩터를 사용하여 ± 3 ° ~ ± 90 ° 범위에서 사용할 수 있습니다.
T435 'L'은 기울기 각도의 크기에 비례하는 높은 수준의 4-20mA 신호를 가지고 있습니다.
장치는 완전히 독립적이며 DC 전원 및 판독 또는 제어 장치에 연결하여 완전한 운영 체제를 구성 할 수 있습니다.
장치는 매우 견고하며 1500g 충격 이벤트를 견딜 수 있습니다.
T435 'L'시리즈의 4-20mA 출력은 전기적으로 시끄러운 환경이나 경사계 출력 신호가 장거리로 이동해야하는 곳을 위해 특별히 설계되었습니다.
T435 'L'시리즈 경사계는 단일 24Vdc 공급 장치에서 작동하며 출력 시리즈 부하 저항은 400Ω이 될 수 있습니다.
Features
T935 Series (Single Axis / Voltage)
T935 시리즈는 고정밀 각도 측정이 필요한 다양한 산업 및 군사 응용 분야와 최대 1500g의 높은 진동 및 기계적 충격이 발생하는 견고하고 공간 제약적인 응용 분야에서 사용되는 서보 경사센서입니다.
Features
FMP 터빈 유량계 다양한 대구경 파이프 액체 및 가스 유량 감지 응용 제품에 사용되며, 디지털 출력 신호가 매우 안정적입니다.
FMT 터빈 유량계
FMT 시리즈 유량계는 매우 낮은 유량 (액체에서 0.002 GPM 및 가스에서 0.01 ACFM)을 측정 할 수 있습니다.
FMT 유량계는 이중 유량관로(dual-orifice) 설계로 유체 흐름을 낮은 질량 / 평형 로터에 맞추고 정밀 베어링을 사용하여 최대 감도를 제공하는 측정 장치입니다.
이는 유량 캘리브레이션의 필요성을 제거하고 더 큰 반복성을 허용합니다.
FM 터빈 유량계 FM 시리즈 유량계는 석유 화학, 제약, 항공 우주 및 자동차와 같은 다양한 산업의 수많은 응용 분야에 사용됩니다. FM 시리즈 터빈 유량계는 고온, 고압 및 고 충격 응용 분야에서 유체 유량측정용으로 특히 적합합니다. FM 시리즈 유량계는 0.5 인치에서 12 인치까지 다양한 크기로 제공되며, FM 시리즈 유량계는 최소한의 오차와 다수 반복 가능한 출력으로 높은 내구성을 제공합니다.
첨부된 datasheet를 참고하여 원하시는 제품의 Spec을 선정하실 수 있습니다.
LCA 1축 Current Output INCLINOMETER
HCA 1축, 2축 MODBUS Protocol INCLINOMETER
HCA 2축 Current Output INCLINOMETER
HCA 2축 Digital Output INCLINOMETER
HCA 2축 Voltage Output INCLINOMETER
HCA 1축 Current Output INCLINOMETER
HCA 1축 Digital Output INCLINOMETER
HCA 1축 Voltage Output INCLINOMETER
High Resolution_2축 CAN open Output INCLINOMETER
High Resolution_2축 Digital Output INCLINOMETER